Sewing for little hands: Build a Softie

softiecover

 

This spring I had the great joy of teaching a few Saturday sewing classes to some great girls and one of my favorite classes was our Build a Softie day. Last Sunday was Sew a Softie day around the world and while I’m a little late to the game I wanted to share this fun activity we did in our class. This is a great designing and sewing activity to fill these last, crazy hot days of summer before school starts up again.

First up, you will need to gather some supplies:
cotton fabric and felt scraps
trim, ribbon, ric rac etc
polyfill stuffing
scissors
chenille #22 needle
thread (I recommend either thin crochet thread or cotton perle embroidery floss size 5)
a needle threader (I highly recommend Loran needle threaders)
buttons for eyes
directions for making your pattern buildasoftie

How to Build a Softie:

Build a Softie Class

Using your Design a Softie sheet, first figure out what shape body you want your softie to have. Using a sheet of printer paper, draw out the shape of the body (make sure to draw it a little bigger than you want it to be. This is called adding a seam allowance – that’s the little bit of fabric that is in the inside where you sewed the two pieces together) Repeat this process for the legs, wings, arms and the rest of the body parts you want to include. Remembering ever time to draw your pattern pieces a little bigger than you want them to be. Cut out your paper pattern.

Build a Softie Class26824689400_bbe05e6a8e_b

Taking your fabric scraps and your paper pattern, cut out the pieces of your softie. Make sure you cut out 2 body parts (a front and a back), two wings, two arms/legs etc. For the ears I recommend using felt because it’s a bit stiffer and the ears will stand up by themselves.

Build a Softie Class
Build a Softie Class

Now decide if you want to add some trim to separate the head from the body. You can use ribbon, ric rac or even a strip of fabric. Pin this down to the front of your softie and take it to your sewing machine. If you know how to sew with a zig zag stitch, go ahead and sew this down with a wide zig zag straight down the middle of your trim piece. Repeat on the back of your softie (if you want).

Next up, decide what sort of face you want for your softie. Add some eyes, a nose or a beak and using a whipstitch or a running stitch sew these onto the front of your softie.

Now you need to sew your legs and arms. Match each leg up with it’s front and back with right sides facing (this means the backside of the fabric is showing). Sew a straight stitch on your sewing machine all the way around the sides – leave the top open. Check to make sure you don’t have any holes and once you’ve sewn all of them, flip them right side out. You might need to use a chopstick or a seam ripper to help you pull out all the edges.

Build a Softie Class

Now take your arms and legs and pin them in place to the right side of the front piece of your softie. They should each be laying inside. Put the back piece on top – with right sides facing – and pin it to the top.

Build a Softie Class

Sewing really slowly on your machine, sew a seam all around the outside of your softie. Make sure you leave an opening in the side for stuffing. I like to leave my hole on the side between the arm and the leg. Before you flip your softie right sides out, stick your hand in the hole and take out all the pins.

Build a Softie Class

Then flip him right side out and your arms and legs should flip out! Go ahead and start stuffing. And stuff and stuff and stuff!

Build a Softie Class

Sew up the hole with a whipstitch.

Build a Softie Class

And give your new little friend a big hug!

Leave a Reply

Your email address will not be published. Required fields are marked *